NITTOH Power

Tel: +81 (0) 3 3625 6551
Japanese

Hydraulic Pump UP-65SVG

Feature

The compact, high-power 65SVG (70Mpa) series is incorporated as a source of hydraulic pressure at various places. It realized the best out put flow rate in this market.

UP-35RH
ModelElectric MotorMortor kW (2,000rpm)Voltage(AC) 50Hz/60HzAmpsOutput Flow Rate(Lpm)Oil Volume (litres)
7Mpa(70Bar)70Mpa(700Bar)TankEffective
UP-65SVG SeriesCommutator, Single phase 0.65220/2305.0 4.0 0.42 3.02.0
100/110 10.0
UP-65SVGL
(Large Tank)
220/2305.05.0 4.0
100/110 10.0
UP-65SVG-1
Cylinder type
Single Acting
Weight (kg)
Normal(3L) tank:16.6 /
Large(5L) tank:18.6
UP-65SV-1

Advance, Hold, Retract via manual valve









UP-65SVG-3M
Cylinder type
Double Acting
Weight (kg)
Normal(3L) tank:16.6 /
Large(5L) tank:21.0
UP-65SV-3M

Advance: When the manual needle valve is closed and press ON the pendant switch, the motor rotates and the cylinder advances.

Retraction: When the the manual needle valve is opened and the cylinder will return. When the manual needle valve is closed and the cylinder will stop. You can gradually lower the cylinder, so it is suitable for jacking up etc. There is no OFF button.

UP-65SVG-4
Cylinder type
Single Acting
Weight (kg)
Normal(3L) tank:17.7 /
Large(5L) tank:21.1
UP-45SV-4

Advance: When ON switch is pressed, then the motor starts. When ON switch is released, the cylinder can be stopped and hold on advance.

Retraction: When OFF switch is pressed, then the cylinder starts to retract. When OFF switch is released, the cylinder can be stopped and hold on retraction.

UP-65SVG-2
Cylinder type
Single Acting
Weight (kg)
Normal(3L) tank:19.0 /
Large(5L) tank:21.4
UP-45SV-2

Advance: When ON switch is pressed, then the motor starts as well as a cylinder extends.

Retraction: When ON switch is relased, the cylinder automatically retracts at once. The cylinder cannot be stopped on retraction. There is no "OFF" button.

UP-65SVG-7
Cylinder type
Double Acting
Weight (kg)
Normal(3L) tank:16.1 /
Large(5L) tank:18.5
UP-65SV-7

Advance: When the manual valve lever is set to the left (A), and press ON of the pendant switch, the motor rotates, and the cylinder advances. When ON switch is released, the cylinder can be stopped and hold on advance.

Retraction: When the manual valve lever is set to the right (B), and press ON of the pendant switch, the motor rotates, and the cylinder retracts. When ON switch is released, the cylinder can be stopped and hold on retraction.

UP-65SVG-8SP
Cylinder type
Double Acting
Weight (kg)
Normal(3L) tank:19.5 /
Large(5L) tank:21.9
UP-65SV-8SP

Advance: When A switch is pressed, then the motor starts. When A switch is released, the cylinder can be stopped and hold on advance.

Retraction: When B switch is pressed, then the cylinder starts to retract. When B switch is released, the cylinder can be stopped but not hold on retraction.

UP-65SVG-8R
Cylinder type
Double Acting
Weight (kg)
Normal(3L) tank:21.5 /
Large(5L) tank:23.9
UP-45SV-8R

Advance: When A switch is pressed, then the motor starts. When A switch is released, the cylinder can be stopped. (NOT hold pressure)

Retraction: When B switch is pressed, then the cylinder starts to retract. When B switch is released, the cylinder can be stopped on retraction. (NOT hold pressure) *By additional pilot check valve, pressure can be hold. (on request)

UP-65SVG-8A
Cylinder type
Double Acting
Weight (kg)
Normal(3L) tank:19.0 /
Large(5L) tank:21.4
UP-45SV-8A

Advance: When A switch is pressed, then the motor starts. When A switch is released, the cylinder can be stopped and not hold on advance. ( For hold type, 8SP is reccomended )

Retraction: When B switch is pressed, then the cylinder starts to retract. When B switch is released, the cylinder can be stopped but not hold on retraction.

Use / Purpose

Jack-up / Puller / Wire Cutter / Puncher / Pipe bender /Lifter

More details

The UP-65SVG series realized the best out put flow rate inthis market. It is used in various scenes regardless of location.

The UP-65SVG series was adopted as a hydraulic source of jack-up to support inclined houses and condominiums during the 2011 Tōhoku earthquake and tsunami and the 2016 Kumamoto earthquakes.
It is also adopted as a source of hydraulic pressure for jack-up when transporting Shinkansen or train car by land.
Our UP-65SVG series is used when lifting bridge of highway (new Tomei Expressway etc) to piers.
We delivered our pump to Kyushu Electric Power Company as a source of hydraulic pressure when setting up a large power transmission tower.
Distributor Wanted
We are looking for new distributors. If you are interested in becoming a distributor, please contact us by email. We will reply to you within a few days.

For help with your next pump application, talk to the experts.

Nittoh Zohki Co., Ltd.

2-4-10 Kamezawa Sumida-Ku Tokyo 130-0014
Tel: +81 (0) 3 3625 6551
Fax: +81(0) 3 3625 6553